Ferrari 360 - Capristo On-board Exhaust Remote Control Kit (for purchase only with Capristo exhaust systems)

Ferrari 360 - Capristo On-board Exhaust Remote Control Kit (to fit standard exhaust + Capristo exhaust systems)

Most modern performance cars are fitted with valve-operated original exhaust systems, which open and close valves to manipulate the exhaust sound in accordance with the engine ECU settings. The purpose of the factory ECU setting is to keep the car within EU noise homologation regulations (as they apply to new cars). As a result, a linear and progressive build up of exhaust sound is not possible.

In real terms, this means that the cars are exceptionally quiet at low rpm with no sound at all (where the valves are closed), and only become louder higher up the rev range or under high load (when the valves open). It means there is no linearity in sound levels, and the car has an 'on/off' development of sound where the valves open and close. Most of all, it means that the cars really only sound exciting, if at all, when driven hard, typically when approaching unsafe or illegal speeds.

The reason to have exhaust back pressure control is to obtain a better engine torque band and to maintain drive-ability in a wide range of conditions. Today's high performance engines prefer a free flowing exhaust at wide throttle openings and high rpm. At smaller throttle openings and low rpm encountered in traffic, a slight increase in exhaust back pressure, results in better low end torque and a more user friendly engine.

This pressure is controlled by one or a set of butterfly valves in the exhaust system. These valves are in turn controlled by the engine ecu which would open and close the valves according to a preset set of rules. When using the vehicle on a track or in a sporty environment where it is desirable to keep the valves in an open position, a push of a button on the remote controller makes this possible.

Q: So what do we have available here?
A: The Capristo Remote Controlled Valve Operation Unit

Capristo are the leaders in remote-controlled sports exhaust systems – providing users with a choice of sound levels at the touch of a button.

This onboard remote control kit gives you the option of opening your exhaust valves at the touch of a button.

This controller interfaces perfectly with your exhaust valve equipped CAPRISTO® or OEM Ferrari exhaust system. The electrical connections from your original wiring harness, powers the controller. This essentially makes fitment of this controller as easy as 'plug and play'.

The remote key fob supplied with the controller is stylish and is pre-programmed. An on board self learning function allows you to program more key fobs should the need arise. An added safety feature is a fail safe condition which allows the exhaust valves to go to the open position in case of electrical or vacuum failure. This prevents engine and or header damage from excessive heat build up.

The remote control kit will enable you to control when the valves open or close, thereby enabling you to remotely silence your system or increase the sound whenever you want, regardless of revs, load or how you are driving.

The supplied wiring harness comes with both a long and short reach option. It can also be used for single or dual exhaust valve operation.

This item will fit the following model/s:

• Ferrari 360 (all years)